The heating element of the infrared carbon fiber heating tube is imported carbon fiber heating wire, which has the advantages of high power, rapid heating, high heat energy, long service life, and the power can be adjusted at will. The electric heating conversion efficiency is high and the energy saving effect is remarkable.
The carbon fiber heating element is a pure black body material. In the electric-heat conversion process, the visible light is very small, and the electric-heat conversion efficiency is more than 95%. The far infrared rays emitted by the human body, clothes, water, etc. are directly absorbed by the human body, clothes, and water. The loss is small; the carbohydrate absorption is stronger, the carbon atom resonance effect is good, and the product efficiency is greatly improved. Carbon fiber infrared quartz heating tube infrared wavelength range between 2-4μ.
Technical Parameters:
Rated voltage: 600V, 480V, 440V, 400V, 380V, 220V, 110V, (determined according to user needs)
Tube length: 300-2500mm (made according to user needs)
Power range: 50-10000W
Tube outer diameter: Ф6, Ф8, Ф10, Ф11, Ф12, Ф13, Ф14, Ф15, Ф18, Ф11*23, Ф15*33 (made according to user needs)
Thermal response speed: 3-5 seconds
Service life: more than 7000 hours.
Surface temperature: up to 750°C (temperature varies due to different power densities)
1. Components are allowed to work under the following conditions:
A. The relative humidity of the air is not more than 95 percent.
B. There is no flammable, explosive, corrosive gas and conductive dust in the surrounding environment.
C. Without violent impact and vibration;
D. The working voltage should not be greater than 1.1 times the rated value, and it can also be effectively grounded.
E. Insulation resistance ≥ 1MΩ Dielectric strength: 2KV/1min.
2. The electric heating pipe should be well positioned and fixed. The electric heating pipe is generally equipped with corresponding metal pipe clamps and ceramic pipe clamps according to the porcelain seats at both ends.
When the operating temperature exceeds 200 degrees Celsius, a high-temperature wire and screw connection that withstands 400 degrees or more is used.
3.Insulating material of infrared electric heating tube The quartz glass is a brittle material. When installing and using it, it should be safe and use it according to the specific conditions of the heated object.
Take necessary protective measures to avoid mechanical damage
